V3 configurator

[FlyAlberta]

Just updated my controller to 7.3 firmware, and it’s defaulted back to a LH throttle. There doesn’t seem to be a configurator for the V3 canbus controller as there is with the legacy. Is there anyone that can point me in the right direction?

[skola28 (J. R.)]

@flyalberta Kinda funny, you’re basically trudging the same path I have.

New SP140 firmware - 6.5

Thanks JR. You do have the newest controller (which supports CAN bus reading from the battery). I need to finalize testing and adjustments for the new configuration tool that is compatible with your controller. Some changes have been made to the underlying technology we use to communicate with the controller from the browser. I will be working on this over the next few days and will provide an update here when it is available. Thanks for your patience!

Long story short, it seems the configurator is not ready yet for the throttles that we have; or at least it wasn’t a few weeks ago.

[zjwhitehead (Zach Whitehead)]

We have a few things to polish up on it still but in the meantime, you can use this site to make the changes to your controller (ignore the firmware update section, just make sure you used the non-staging site to update to 7.3 first). Let me know how it works for you https://config-staging.openppg.com/configurators/sp140-v3/

[zjwhitehead (Zach Whitehead)]

Here’s a full video on the new configurator for the latest controllers:

How to update your V2.5 hand controller and display overview

Here is an overview of the V2.5 hand controller display and how to update. We also updated the user manual to show this info in more detail. https://www.youtube.com/watch?v=ScThW7ijpY8&t [image]

Thanks for your patience here. Since this is resolved, I’m going to close this thread.